Chitra, Bhavnagar, Gujarat
- GST NO. : 24AHAPS8332E1ZI
Extra Heavy Duty All Geared Radial Drilling Machine
Leading Manufacturers, Exporters, Wholesaler and Retailer of 65mm Extra Heavy Duty All Geared Radial Drilling Machine and 75mm Extra Heavy Duty All Geared Radial Drilling Machine from Bhavnagar.
| Business Type | Manufacturer, Exporter |
| Model Name/Number | 65X16/1800 |
| Brand | Maan |
| Taper In Spindle | MT - 5 ( Nose ) |
| Spindle Travels | 325 mm ( Auto/manual ) |
| Spindle Diameter | 78 Mm ( At Front Bearing ) |
| Ram Diameter | 110 mm |
| Number of Spindle | 16/40 |
| Speeds Of Spindle | 2300 RPM |
| Number of Auto Feeds | 4/0.10 - 0.25 |
| Travel of Rail | 725 mm ( Vertical ) |
| Travel Of Drilling Head | 1100 mm ( Horizontal ) |
| Power Supply | 415 V, 3 Phase, 50Hz |
| Drilling Head Motor Power | 6 HP |
| Arm Elevating Motor Power | 3 HP |
| Drilling Radius | 500 / 1600 ( Min/Max ) |
| Distance Between Base Plates To Spindle | 395/1300 ( Min/Max ) |
| Drilling Head Traverse | Max 1100 mm (Manual) |
| Column Sleeve Diameter | 400 mm |
| Vertical Traverse of Arm | 725 mm ( Auto ) |
| Rotation of Arm | 0-180 Degree |
| Working Surface | 1450 X 900 mm |
| Overall Size | 2150 X 970 X 210 mm |
| Number of T Slots And Nominal Size | 4/22 |
| Weight Of Machine with electrical And standard accessories | 5000 Kgs |
| Space Required By Machine | 2600 X 2200 X 2750 Mm |
| Box Table Size | 600 X 500 X 500 mm |
| Drilling Capacity In Steel | 65/70mm (Having 600mpa Tensile Strength) |
| Drilling Capacity In Cast Iron | 75 mm Having 180 Bhn |
| Tapping Capacity | 30 mm |
Preferred Buyer From
| Location | Anywhere in India |
Features:
- Main Spindle is made of "EN8" material and hardness
- MT-bore internally grinded
- Accuracy and run out of 0.01 to 0.03 in main spindle shaft
- Pinion Shaft is made of "EN8" material and hardness
- Provided 4-8 speeds by accurate balancing
- Spindle sleeve-grinded
- Work light[As per requirement]
- Full size work table with accurate right-angled.[390X300][Surface Grinding is available as per your required]
- Tapper Roller facility for better sliding of drill head an arm guide
- Coolant system [As per requirement]
- Speeds can easily change
- Nitride Hardened "Ram"
- All gears are made of alloy steel[Gear Material] and Heat treatment [50 to 60 HRC] hardened & Lapped running in oil bath fitted with splined shafts
- Ram is accurately grinded and Honing process is done in the bore body containing "Ram"
- All the gears assemble in the machine are perfectly sized according to requirement All Bearing [SKF/NSK[Japan]/NBC Bearing]
- All Electrical parts are good quality.[Company:L&T]
- Pinion and worm is grinded as per the sizes required
- Column Design is heavy thickness and grinded as per the sizes required [column size:180mm]
- Spindle reverse and tapping control[As per your required]
- Specially spring type balanced spindle travel
- Manual And Auto feed options
- The Auto feed machanism is designed in such a manner that if incase the machine gets overloaded or the drill bit may get locked during operation the machine will automatically start slipping that will prevent any accident or any kind of damages
- Drilling last capacity : 40mm
- Heavy Duty structures
- Strongly ribbed and thick walled base plate having built-in coolant tank.Generously Proportional & Well adequately ribbed base plates and column & arm for maximum rigidity and minimum deflection
- This machine may be capable of drilling & milling & tapping & honing & counter-boring & spot facing & Reaming & boring and other similar utilities.Arm guide surface are precision scraping process
- Wooden case available on demand.
| Business Type | Manufacturer, Exporter |
| Brand | Maan |
| Model Name/Number | 75X16/1800 |
| Drilling Capacity In Steel | 70 mm ( Having 600 Mpa Tensile Strength) |
| Drilling Capacity In Cast Iron | 80 mm (180 BHN ) |
| Travel of Rail | 850 mm ( Vertical ) |
| Travel of Drilling Head | 1350 mm ( Horizontal ) |
| Power Supply | 415V, 3Phase, 50Hz |
| Drilling Head Motor | 7.5 HP |
| Arm Elevating Motor | 3 HP |
| Drilling Radius | 500/1850 mm |
| Distance Between Base Plate to Spindle | 500/1350 mm (Spindle Retracted) |
| Drilling Head Traverse | 1350 mm |
| Column Sleeve Diameter | 400 mm |
| Vertical Traverse of Arm | 850 mm |
| Rotation of Arm | 0-180 Degree |
| Working Surface | 1700 x 1060 mm |
| Overall Size | 2350 x 1060 mm |
| Number of T Slots And Nominal Size | 4/22 |
| Weight of Machine with Electricals And Standard Accessories | 4500 Kg |
| Box Table Size | 600 x 500 x 500 mm |
Preferred Buyer From
| Location | Anywhere in India |
Features:
- Main Spindle is made of "EN8" material and hardness
- MT-bore internally grinded
- Accuracy and run out of 0.01 to 0.03 in main spindle shaft
- Pinion Shaft is made of "EN8" material and hardness
- Provided 4-8 speeds by accurate balancing
- Spindle sleeve-grinded
- Work light[As per requirement]
- Full size work table with accurate right-angled.[Surface Grinding is available as per your required]
- Tapper Roller facility for better sliding of drill head an arm guide
- Coolant system [As per requirement]
- Speeds can easily change
- Nitride Hardened "Ram"
- All gears are made of alloy steel[Gear Material] and Heat treatment [50 to 60 HRC] hardened & Lapped running in oil bath fitted with splined shafts
- Ram is accurately grinded and Honing process is done in the bore body containing "Ram"
- All the gears assemble in the machine are perfectly sized according to requirement All Bearing [SKF/NSK[Japan]/NBC Bearing]
- All Electrical parts are good quality.[Company:L&T]
- Pinion and worm is grinded as per the sizes required
- Column Design is heavy thickness and grinded as per the sizes required [column size:180mm]
- Spindle reverse and tapping control[As per your required]
- Specially spring type balanced spindle travel
- Manual And Auto feed options
- The Auto feed machanism is designed in such a manner that if incase the machine gets overloaded or the drill bit may get locked during operation the machine will automatically start slipping that will prevent any accident or any kind of damages
- Drilling last capacity : 40mm
- Heavy Duty structures
- Strongly ribbed and thick walled base plate having built-in coolant tank.Generously Proportional & Well adequately ribbed base plates and column & arm for maximum rigidity and minimum deflection
- This machine may be capable of drilling & milling & tapping & honing & counter-boring & spot facing & Reaming & boring and other similar utilities.Arm guide surface are precision scraping process
- Wooden case available on demand
