Chitra, Bhavnagar, Gujarat
- GST NO. : 24AHAPS8332E1ZI
All Geared Double Column Radial Drilling Machine
Leading Manufacturers, Exporters, Wholesaler and Retailer of 45mm All Geared Double Column Radial Drilling Machine, 60mm All Geared Double Column Radial Drilling Machine and 62mm All Geared Double Column Radial Drilling Machine from Bhavnagar.
| Business Type | Manufacturer, Exporter |
| Brand | Maan |
| Model Name/Number | 45x12/1200 |
| Drilling Capacity (Steel) | 45 |
| Type of Drilling Machine | Radial |
| Spindle Travel | 250mm |
| Drilling Capacity in Cast Iron | 50mm |
| Tapping Capacity | 42mm |
| Taper in Spindle | MT4 or MT5 |
| Number of Spindle Speed | 12 |
| Country of Origin | Made in India |
| Production Capacity | 50 |
| Delivery Time | 20 to 45 days |
Preferred Buyer From
| Location | Anywhere in India |
| Business Type | Manufacturer, Exporter |
| Model Name/number | Maan 60x16/1500 |
| Brand | Maan |
| Spindle Travels | 325mm ( Auto/manual ) |
| Number of Spindle | 16/40 |
| Number of Spindle Speeds | 2000 RPM |
| Number of Auto Feeds | 4/0.10 - 0.25 |
| Drilling Head Motor | 5 HP |
| Arm Elevating Motor | 2 HP |
Preferred Buyer From
| Location | Anywhere in India |
Key Features:
- Main Spindle is made of "EN8" material
- MT-bore internally grinded
- Accuracy and run out of 0.01 to 0.04 in main spindle shaft
- Pinion Shaft is made of "EN8" material
- Provided 4-8 speeds by accurate balancing
- Spindle sleeve-grinded
- Work light[As per requirement]
- Full size work table with accurate right-angled.[390X300][Surface Grinding is available as per your required]
- Tapper Roller facility for better sliding of drill head an arm guide
- Coolant system [As per requirement]
- Speeds can easily change
- Nitride Hardened "Ram"
- All gears are made of alloy steel[Gear Material] and Heat treatment [45 to 55 HRC] hardened & Lapped running in oil bath fitted
- Ram is accurately grinded and Honing process is done in the bore body containing "Ram"
- All the gears assemble in the machine are perfectly sized according to requirement All Bearing [NSK [Japan]/NBC/FLT Bearing]
- Column Design is heavy thickness and grinded as per the sizes required [column size:170mm]
- Specially spring type balanced spindle travel
- Manual And Fine feed system options
- Drilling last capacity : 40mm
- Heavy Duty structures
- Strongly ribbed and thick walled base plate having built-in coolant tank
- Generously Proportional & Well adequately ribbed base plates and column & arm for maximum rigidity and minimum deflection
- This machine may be capable of drilling & milling & tapping & honing & counter-boring & spot facing & Reaming & boring and other similar utilities.Arm guide surface are precision scraping process
- Arm length is long [950mm]
- Wooden case available on demand
Optional Accessories: (At Extra Price)
- Box Table
- Table stand for drilling cum milling machine
- Coolant Pump with Fitting
- Machine Lamp
- Drill Chuck with key & arbor
- Drill Sleeve
- Drill Vice
- Special T-Bolts
- Foundation Bolt
- Service Tool
- Wooden Box Packing & Forwarding
| Business Type | Manufacturer, Exporter |
| Model Name/number | Maan 62x16/1500 |
| Max Tapping Capacity | 50 mm |
| Drilling Capacity In Cast Iron | 70 mm ( Having 180 BHN ) |
| Drilling Capacity In MS | 62 mm ( Having 200 Mpa Tensile Strength ) |
| Drilling Capacity In Steel | 60 mm ( Having 600 Mpa Tensile Strength) |
| Power Supply | 415V,3 Phase,50 Hz |
| Drilling Head Motor | Drilling Head Motor |
| Arm Elevating Motor | 2 HP |
| Drilling Radius | 500/1470 mm |
| Distance Between Base Plate to Spindle | 490/1250 mm (Spindle Retracted) |
| Drilling Head Traverse | Max 1000 mm (Manual) |
| Vertical Traverse of Arm | 740 mm (Auto) |
| Rotation of Arm | 0-180 Degree ( Both Side ) |
| Working Surface | 1400 x 970 mm |
| Number of T Slots And Nominal Size | 4/22 |
| Weight of Machine with Electricals And Standard Accessories | 3600/4100 Kg |
| Box Table Size | 600 x 500 x 500 mm |
| Wooden Packing Dimension | 2300 x 1000 X 2450 mm |
Preferred Buyer From
| Location | Anywhere in India |
Features:
- Main Spindle is made of "EN8" material
- MT-bore internally grinded
- Accuracy and run out of 0.01 to 0.04 in main spindle shaft
- Pinion Shaft is made of "EN8" material
- Provided 4-8 speeds by accurate balancing
- Spindle sleeve-grinded
- Work light[As per requirement]
- Full size work table with accurate right-angled.[390X300][Surface Grinding is available as per your required]
- Tapper Roller facility for better sliding of drill head an arm guide
- Coolant system [As per requirement]
- Speeds can easily change
- Nitride Hardened "Ram"
- All gears are made of alloy steel[Gear Material] and Heat treatment [45 to 55 HRC] hardened & Lapped running in oil bath fitted
- Ram is accurately grinded and Honing process is done in the bore body containing "Ram"
- All the gears assemble in the machine are perfectly sized according to requirement All Bearing [NSK [Japan]/NBC/FLT Bearing]
- Column Design is heavy thickness and grinded as per the sizes required [column size:170mm]
- Specially spring type balanced spindle travel
- Manual And Fine feed system options
- Drilling last capacity : 40mm
- Heavy Duty structures
- Strongly ribbed and thick walled base plate having built-in coolant tank
- Generously Proportional & Well adequately ribbed base plates and column & arm for maximum rigidity and minimum deflection
- This machine may be capable of drilling & milling & tapping & honing & counter-boring & spot facing & Reaming & boring and other similar utilities.Arm guide surface are precision scraping process
- Arm length is long [950mm]
- Wooden case available on demand
